Technical Developer Information |
There are several possible ways for 3rd party manufacturers to interface their products to CCTV Software products
and these are described below:
Camfunction Range - TCP/IP link for 3rd party applications interfacing to Camfunction
Take control of the Camfunction range of products over any TCP/IP network using our simple ASCII based protocol.
Example source code (written in Visual Basic 6) is provided.
View PDF >>
Download:
Camfunction - TCPIP link for 3rd party applications
File Name:
Camfunction - TCPIP link for 3rd party applications.zip
File size:
0.1Mb
|
Camfunction Range - DDE link for 3rd party applications interfacing to Camfunction
Take control of the Camfunction range of products using a DDE link using our simple ASCII based protocol.
Example source code (written in Visual Basic 6) is provided.
View PDF >>
Download:
Camfunction - DDE link for 3rd party applications
File Name:
Camfunction - DDE link for 3rd party applications.zip
File size:
0.1Mb
|
CCTV Software generic alarm protocol
CCTV Software generic alarm protocol is an effective way of generating alarms in the Camfunction range of products using a simple ASCII based protocol.
You can adapt your own alarm handling software / equipment to form a link and raise alarms in Camfunction.
You can also configure dedicated hardware (such as access control equipment) to send simple generic alarm protocol to Camfunction (hardware must be configurable to send user definable strings on event occurence)
The 'CCTV Software generic alarm protocol' can be transmitted using TCP/IP, DDE or serial (RS232) communications.
View PDF >>
|
Camfunction IP Monitoring - DDE link for alarm panel protocol forwarding
Our IP Monitoring software is compatible with several manufacturers alarm devices.
The protocol data that is received from those devices can be passed on to your own software using a simple DDE mechanism.
Example source code (written in Visual Basic 6) is provided.
View PDF >>
Download:
Camfunction - DDE link for 3rd party applications
File Name:
Camfunction - DDE link for 3rd party applications.zip
File size:
0.1Mb
|
PC Multiplexer Range - 3rd party search facility
You can use TCP/IP networking to form a link to our PC Multiplexer Range of software, and then
issue time and date search command using our simple ASCII based protocol. PC Multiplexer will respond with JPEG
picture data relevent to the enquiry. Further commands provide skip frame forward and backward functionality.
Example source code (written in Visual Basic 6) is provided.
View PDF >>
Download:
Camfunction - DDE link for 3rd party applications
File Name:
Camfunction - DDE link for 3rd party applications.zip
File size:
0.1Mb
|